Destination Selecting System (confirming to EN 81-1 & EN 81-2)
The Destination Selecting System allows passengers to select their destination floor at the platform and automatically selects the optimal elevator to service the call without the passenger having to select floors again inside the car.
Collective Control System (DCL/FCL)
It refers to collective of several elevators. The system is capable to arrange the most applicable elevator to response to single at all time by the optimal calculation method not only for economic and reasonable considerations but also for carry efficacy, based on minimizing waiting time of passengers and saving of electric power.
Group Control Management System
Running Mode in Rush-hour: Satisfy the needs in rush hour in public occasions such as the office building, hotels etc.
Even Running Mode: Minimized waiting time distribution principle with the prompt and reasonable elevator response.
Idle Running Mode: The elevators are distributed evenly in the designated area to wait in idle time to guarantee the quick and prompt response toward the outer calls.
Digitalized Variable Frequency Technology
Advanced Vector Variable Frequency Technology can regulate the speed in time according to the comfort degree of human body.
High speed digitalized signal processing system has more accurate and sensitive speed control to the traction machine and reduces the elevator vibration to the minimum. The latest low-noise control technology have greatly decreased the elevator noise and resulted in a quiet and smooth elevator operation.
It applies the prompt and accurate control to the rotating torque of the main frame through adjusting the current and phase according to the actual load, UP & DOWN speed of the car for the purpose of smooth elevator running.
Precise Position Control System
The advanced sensors provides precise real time single feedback to the movement status of the motor, realizing positioning of the moving in the hoist-way in millimeters, realizing error free leveling.
Serial Communication Technology
It adopts the network communication, it greatly reduces the wires, enhance the reliability and shortens the installation period.
Anti-Nuisance
In order to avoid the error car command, the processor will logically judge and cancel the abnormal command for purpose of bring about the harmonious lift travel and the comfortable ride.
RF ID Based COP Access Module prevents the unauthorized access of the COP button hence only authorized person can access the COP of the LIFT where security is a major issue. RF ID Based access control module works on the Remote wireless Radio Frequency scanning of the RF Tag. Its wireless reading makes convenient arrangement inside the COP of the LIFT Car. It’s output can be interlocked with particular floor OR whole COP depends on the application.
FEATURES
- Radio Frequency Based Reading /Writing principle.
- Remote wireless Card access.
- Available on different kinds of plate finish i.e. Hairline, Mirror, Anodize etc.
- Display varieties like 7-Segment, Dot Matrix ,LCD, TFT available .
- Interfacing of RF ID & Bio metric Based access